It is a basic element for safety behind the wheel, as it must guarantee the driver’s visibility in unfavorable conditions.
They may not be considered so elementary, but windshield wipers are essential for the safety of a vehicle. Its good condition guarantees the driver’s visibility in adverse situations, when it rains or when the windshield gets dirty over time, especially if the car is parked on the street.
For this reason, and because its price is not very high, it is convenient to keep the wiper blades in the best possible conditions. They can be bought for less than 20 euros and are easy to change at home, without having to go to a workshop.
How can you detect that the brushes are in bad condition? It is appreciated at first sight. If when you activate them (with little water on the glass) they dirty more than they clean, the time has come to replace them.
When to change the brushes of the car?
In general, manufacturers recommend renewing the brushes every year. But it will have to be done ahead of time if there has been more intense use than usual, or if the wipers do not clean well or make too much noise. Care must be taken after the summer, because the sun and heat accelerate the deterioration of the rubber.
How to change the wiper rubber?
It is not difficult to change the wipers of the car, but some previous considerations must be taken into account. To begin with, not all brushes are suitable for every car. It will be necessary to verify, in the product packaging itself, that they are valid for the specific model.
On the other hand, in many cars there are differences in size between the two front wiper blades, so attention must be paid to where each one is placed. You can also opt for universal rubber bands, which include several anchoring pieces to guarantee support in any car. In any case, as the RACE automobile club recommends, the best decision will be to choose a quality windshield wiper that ensures good cleaning of the glass.
When the brushes have been chosen, these are the two steps that must be followed for their placement, as simple as they are intuitive:
– Remove the old brushes. With the windshield wiper in a vertical position, you will have to look for the anchoring system. Some vehicles have a trim that covers it and must be removed. Then, all you have to do is press the safety tab or tabs and pull until the brush comes out.
– Place the new replacement. To put the brush, the process is the opposite. It must be located in the appropriate place and pressed until a click is heard. The operation is the same for both. As a last step, you have to check that they rest well on the windshield and that they sweep the glass correctly. Fuente: https://motor.elpais.com
